176 found, showing page 4 of 5
$11.29
1/4" V-GROOVE ROUTER BIT
For routing, inlaying, mortising in woods and other soft materials. 1/8" shank.
View Details
$21.99
EZ LOCK STARTER KIT
The Dremel EZ Lock makes accessory changes easy as pull, twist, and release. The 1-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through a range of materials from metal to plastic. Eliminates the need for screw and screwdriver. Kit contains 1 each Model No. EZ402 (SKU 340535) mandrel and 5 each Model No. EZ456 (SKU 340510) cutting wheels. For use on all Dremel rotary tools.
View Details
$17.99
EZ CUT-OFF WHEEL MTL 5PK
For use with the Dremel EZ Lock system. Makes accessory changes easy. Lasts 2 times longer than current fiberglass-reinforced cut-off wheels.
View Details
$12.99
5PK CUT-OFF WHEEL
For use with the Dremel EZ Lock system. Makes accessory changes easy. Lasts 2 times longer than current fiberglass-reinforced cut-off wheels. Includes 5 plastic cut-off wheels.
View Details
$12.99
EZ LOCK MANDREL
The Dremel EZ Lock makes accessory changes easy as pull, twist, and release. The 1-piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. Mandrel is for use with exclusive EZ Lock accessories.
View Details
$13.99
DREMEL GROUT REMOVAL BIT
Replacement bit for Dremel grout removal attachment. Solid carbide tipped.
View Details
$6.99
6PK 3-1/2" 180G TRI SAND
6PK 3-1/2" 180G TRI SAND
View Details
$8.99
*ASST MULTI-MAX SANDPAPER
For sanding wood. Bare wood, hardwood, soft wood, and chipboard. Includes: 2 each of 60, 120, and 240 grit.
View Details
$8.99
*ASST MULTI-MAX SANDPAPER
For sanding paint. Varnish and paint removal. Includes: 2 each of 80, 120, and 240 grit.
View Details
$11.99
DREMEL 15/16" CUTOFF WHEEL
For cutting metal with limited use on wood and plastic. Cut-off wheel makes it easy to cut or slot bolts, screws, sheet metal, thin wood, and plastic. The cut-off wheel cuts only along its edge. Use with mandrel 402.
View Details
$6.49
DREMEL COMPOUND POLISHING
For use with polishing wheels. Brings a high luster to metals or plastics. 1 oz. vial.
View Details
$7.99
SANDER DRUM 1/4" dremel
Sanding drum mandrel holds a sanding band covered with aluminum oxide abrasive. For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces, and shaping rubber surfaces. 1/8" shank. Sanding bands are easily replaceable on drums. Includes 1 coarse, 60 grit sanding band.
View Details
$4.99
*COLLET 1/32"
For Moto-Tools model No. 260 Series 55-3, model No. 270 Series 66-2, and model No. 280 Series 66-2.
View Details
$10.49
*WHEEL ABRASIVE 1"MED
Aluminum oxide. For cleaning, deburring, polishing metal and stainless steel. Medium grit. 1/8" shank.
View Details
$11.29
BIT ROUTER STRAIGHT 3/16"
For routing, inlaying, mortising in woods and other soft materials. 1/8" shank.
View Details
$11.99
DREMEL BIT ROUTER
For routing, inlaying, mortising in woods and other soft materials. 1/8" shank.
View Details
$4.79
6PK 1/4"CRSE SANDER BAND
For shaping and smoothing wood and fiberglass. Removes rust from metal surfaces. Shapes rubber surfaces.
View Details
$4.79
*BAND SANDER 1/4" FIN
For shaping and smoothing wood and fiberglass. Removes rust from metal surfaces. Shapes rubber surfaces.
View Details
$12.29
CUTTER TUNG CARBIDE
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$12.29
TUNGSTEN CARBIDE CUTTER
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$12.29
CUTTER TUNG CARBIDE
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$12.29
CUTTER TUNG CARBIDE
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$12.29
CUTTER TUNG CARBIDE
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$12.29
*TUNGSTEN CARBIDE CUTTER
Use on hardened steel, fired ceramics and other hard materials. 1/8" maximum cutting head. 1/8" shank.
View Details
$17.99
CUTTER TUNG CARBIDE
Fast cutting needle-sharp teeth for greater material removal with minimum loading. Use on fiberglass, wood, plastic, epoxy, and rubber. 1/8" shank.
View Details
$16.99
CUTTER TUNG CARBIDE
Fast cutting needle-sharp teeth for greater material removal with minimum loading. Use on fiberglass, wood, plastic, epoxy, and rubber. 1/8" shank.
View Details
$6.29
DREMEL CUTTER ENGRAVING
Ideal for engraving, carving, routing in wood, fibre, plastic and soft materials - everything except hardened materials. All have 1/8" shanks.
View Details
$6.39
DREMEL WHEEL FELT POLISHING
The felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound. Perfect for general polishing of most ferrous metals, stones, glass and ceramics. Felt polishing bobs can be used with or without polishing compound. Self-renewing surface ensures that the felt polishing cone maintains its effectiveness. Ideal for polishing in corners and hard-to-get-at places. Fits mandrel Model No. 401.
View Details
$5.99
WHEEL FELT POLISHING
The felt polishing point is made to take a semi-rough finish and polish it to a smooth finish. Ideal for general polishing of most ferrous metals, stones, glass and ceramics. Can be used with 421 polishing compound. Perfect for general polishing of most ferrous metals, stones, glass and ceramics. Felt polishing bobs can be used with or without polishing compound. Self-renewing surface ensures that the felt polishing cone maintains its effectiveness. Ideal for polishing in corners and hard-to-get-at places. Fits mandrel Model No. 401.
View Details
$5.49
6PK 1/2"FINE SANDER BAND
For shaping and smoothing wood and fiberglass. Removes rust from metal surfaces. Shapes rubber surfaces.
View Details
$6.99
6PK 3-1/2" 60G TRI SAND
6PK 3-1/2" 60G TRI SAND
View Details
$23.99
*MLTIPRPSE ATTCHMNT
Ideal for cutting drywall, ceiling tile, wood, plastic, fiberglass, laminate, and vinyl siding. Depth adjustment quickly sets correct cutting depth up to 3/4". Easy screw-on mounting to rotary tool. Large window provides excellent visibility for better control. Compatible with most Dremel tools. Includes 2 drywall cutting bits, 1 multipurpose bit, instructions.
View Details
$17.99
BIT CARBIDE
Replacement bit for Dremel grout removal attachment. Solid carbide tipped.
View Details
$12.99
QUICK CHANGE COLLET NUT
Changes bits quickly without the use of a wrench. Provides better visibility of the workpiece. For use with all moto-tools. Includes collet nut and 1/8", 3/32", 1/16", and 1/32" collets.
View Details
$6.99
6PK 3-1/2" 240G TRI SAND
6PK 3-1/2" 240G TRI SAND
View Details