176 found, showing page 1 of 5
$4.99
DREMEL RUBBER POLISHING POINT
DREMEL RUBBER POLISHING POINT
View Details
$9.99
DREMEL CARBIDE WHEEL
Wood and plastic cutting wheel with carbide grit gives the power needed for a variety of high performance cutting applications. Efficiently cuts through a wide range of materials including soft and hard wood, plywood, composited, laminate flooring, drywall, PVC and plastic. Carbide grit. Cuts materials up to 3/4 In. thick. For use with the Saw-Max rotary tool.
View Details
$13.99
3PK MASONRY CUTOFF WHEEL
This 3 In. abrasive wheel cuts a variety of masonry materials including stone, slate, cement board, bricks, concrete, cement backer board, and more. 30 grit silicon carbide. For use with the Saw-Max rotary tool.
View Details
$14.99
*CARBIDE FLUSH CUT WHEEL
This 3" cut-off wheel is specially designed for making flush cuts in a variety of wood materials including soft and hardwood, plywood, composites, laminate flooring, drywall, PVC, and plastic. Uses include: Cutting baseboard for flooring installation and use with the Saw-Max miter guide. Dome-shaped wheel for flush cuts up to 3/4". For use with the Saw-Max circular saw tool.
View Details
$15.99
EZ LOCK THIN CUT WHEEL 5PC.
1-1/2" wheel makes thin-kerf cuts without compromising strength. Reinforcement prevents breakage. For use with the EZ402 EZ Lock mandrel. The dremel EZ Lock makes accessory changes easy as pull, twist, and release. The 1-piece mandrel design simplifies the process of changing cutting wheels.
View Details
$21.99
*EZ LOCK WOOD BLADE
1-1/2" carbide wheel cuts 1/2" wood, laminate, and peg-board. For use with the EZ402 EZ Lock mandrel. The Dremel EZ Lock makes accessory changes easy as pull, twist, and release. The 1-piece mandrel design simplifies the process of changing cutting wheels.
View Details
$9.19
3/8" 120G FLAPWHEEL
For use with rotary tools to grind and polish flat or contoured surfaces. Used most effectively as a finishing sander after heavier surface sanding and material removal is completed. Aluminum oxide. 1/8" shank.
View Details
$10.79
*ABRASIVE BRUSH 36G
Detail abrasive brush allows light sanding of contours, details, and hard-to-reach areas. Built-in polishing compound. Rubber bristles have abrasive inside. No need for polishing compound. Removes exterior surface layer without damage to base layer below. With light pressure, will remove paint, but not the wood. Clean wood, aluminum, plastic, metal, steel, and vinyl. For use with the EZ402 EZ Lock mandrel or standard 402 mandrel. The Dremel EZ Lock makes accessory changes easy as pull, twist, and release. The 1-piece mandrel design simplifies the process of changing cutting wheels.
View Details
$11.49
ABRASIVE BRUSH 120G
Detail abrasive brush allows light sanding of contours, details, and hard-to-reach areas. Built-in polishing compound. Rubber bristles have abrasive inside. No need for polishing compound. Removes exterior surface layer without damage to base layer below. With light pressure, will remove paint, but not the wood. Clean wood, aluminum, plastic, metal, steel, and vinyl. For use with the EZ402 EZ Lock mandrel or standard 402 mandrel. The Dremel EZ Lock makes accessory changes easy as pull, twist, and release. The 1-piece mandrel design simplifies the process of changing cutting wheels.
View Details
$15.99
*METAL GRINDING WHEEL
1-1/2" wheel has a unique domed shape that allows the wheel to be used on either its side or face for surface grinding, sharpening, and flush-grinding. Ideal for shaping, smoothing, sharpening, deburring, rust removal, and general-purpose grinding on most materials, including stainless steel. For use with the EZ402 EZ Lock mandrel. The Dremel EZ Lock makes accessory changes easy as pull, twist, and release. The 1-piece mandrel design simplifies the process of changing cutting wheels.
View Details
$10.79
DIAMOND PT WHEEL 3/32"
For use with rotary tools for fine detail work, cutting, engraving, carving, touch-up, and finishing. Use on wood, jade, ceramic, glass, hardened steel, semi-precious stones, and other hard materials. Removes material quickly and easily. Bits are covered with diamond particles. Use with Dremel collet No. 481 or Dremel chuck No. 4486. 3/32" shank.
View Details
$19.99
DREMEL 1/8" DIAMOND DRILL BIT
For use with the Dremel rotary tool to drill glass, ceramic wall tile, glass block, glass bottles, and jewelry. The diamond-impregnated core-style bit features superior long life and is ideal for drilling in both flat and contoured surfaces. Diamond grit a full 360 deg. around the circumference of the bit allows it to be used in a rasping action to enlarge a hole if needed. Holes on the side of the bit allow the removal of glass dust from inside the bit. Packaged with Dremel cutting oil to increase the speed of cut and prevent damage to the bit from overheating.
View Details
$21.99
SHARPENING ATTACHMNT KIT
Kit includes 3 attachments: Chain saw sharpener, lawn mover sharpener, and garden tool sharpener. Attachments easily screw on to the rotary tool in place of the tool's housing cap. Sharpens dull, slow cutting chain saw blades. Lawn mower guide provides optimal sharpening angle for blades on or off the mower. Guide helps restore edge on garden tools such as shears, hoes, and shovels. Also included are spacers, gauge, wrench, 4 sharpening stones, and instruction manual.
View Details
$19.99
DETAILERS GRIP KIT
Detailer's grip attachment is a quick and easy-to-use extra support for any rotary tool having a threaded nose piece. The grip transfers the weight of the tool to the palm of the hand for improved tool balance and control. Features a soft-grip on the handle for added comfort and an angled bottom to allow the user to get closer to the work. The detailer's grip is especially useful for precise work during engraving, carving, etching, and polishing applications. Also included are engraving cutter, tracing stencil, and instructions.
View Details
$12.99
*3PK SPIRAL BLADE
Spiral blade makes fine, detailed cuts in wood and plastic. Applications include coping wood trim, crown molding, and baseboards. For use with Multi-Flex oscillating accessory, Model No. MM720 (SKU 300501). 3 per pack.
View Details
$12.99
*3PK FLAT BLADE
Flat blade is used for general straight cuts in wood, PVC, and soft metals. For use with Multi-Flex oscillating accessory, Model No. MM720 (SKU 300501). 3 per pack.
View Details
$12.99
*CARBIDE OSC BLADE
Carbide wire is used for general filing and detailed sanding of small, intricate parts. For use with Multi-Flex oscillating accessory, Model No. MM720 (SKU 300501).
View Details
$10.99
RZ DRUM BAND/MANDREL
EZ Drum mandrel makes sanding band changes easy as pull, place and secure. 1-piece mandrel design simplifies the process of changing sanding bands and makes it easy to sand flat surfaces and edges. Provides a quicker and easier alternative to using a traditional sanding mandrel. Allows for flat sanding and edge sanding. Compatible with all Dremel rotary tools. Compatible with all Dremel 1/2" sanding bands (408, 432, 445).
View Details
$7.39
EZ LOCK DISC 240 GRIT
Allows for flat sanding and edge sanding. Lasts twice as long and removes twice as much material than regular Dremel sanding discs. EZ Lock system allows for 7 times faster accessory changes than regular Dremel sanding discs. EZ Lock sanding discs use the EZ Lock mandrel to make accessory changes easy as pull-twist-release (sold separately).
View Details
$22.99
5-PIECE ZIP BIT SET
Provides everything needed to cut drywall, wood, plastics, and wall tile in one convenient package. Includes (1) drywall guidepoint bit, (1) standard bit, (1) wall tile bit, (2) multi-purpose bits for cutting wood, fiberglass, OSB (oriented strand board), laminates, plastic and vinyl/aluminum siding.
View Details
$13.79
1-1/4" TITANIUM BLADE
Titanium coated bi-metal blade is made with high speed steel material to cut through wooden materials up to 2", nails, decking screws, drywall, plastics. Stepped shape for sawing flush to the surface. Can be plunged into material at any point, with no clearance necessary behind the workpiece. Ideal for all crafts including general contracting, flooring, tile and bathroom renovation. Features ONE FIT universal system allowing blades to fit most multi-tools/oscillating tools. Adapter included to fit Dremel Quick Release & old Rockwell.
View Details
$14.79
2-1/2" TITANIUM BLADE
Titanium coated bi-metal blade is made with high speed steel material to cut through wooden materials up to 2", nails, decking screws, drywall, plastics. Stepped shape for sawing flush to the surface. Can be plunged into material at any point, with no clearance necessary behind the workpiece. Ideal for all crafts including general contracting, flooring, tile and bathroom renovation. Features ONE FIT universal system allowing blades to fit most multi-tools/oscillating tools. Adapter included to fit Dremel Quick Release & old Rockwell.
View Details
$8.99
2PK 3/4" NYL BRSL BRUSH
For cleaning and polishing silverware, jewelry and metal surfaces. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Ideal for hard-to-reach places. All have 1/8 In. (inch) shanks.
View Details
$8.59
2pk 1/2" NYL BRSL BRUSH
For cleaning and polishing silverware, jewelry and metal surfaces. Can also be used for cleaning hard plastic or aluminum such as graphite golf clubs or aluminum wheels. Can be used with polishing compound. Ideal for hard-to-reach places. All have 1/8 In. (inch) shanks.
View Details
$6.49
1" POLISHING WHEEL
Emery-impregnated disc gives you the power to polish most ferrous metals, as well as stones, glass and ceramics. It can be used to remove small burrs and scratch marks left by grinding and sanding, and can also help you clean and define grooves. 1 In. (inch) diameter wheel. 1 In. tip is perfect for small projects. Easily cleans and polishes coarse surfaces. 1/8 In. (inch) thick. Use with 1/8 In. shank mandrel. Compatible with most Dremel rotary tools.
View Details
$8.89
2PK 3/4" CRBN STL BRUSH
Versatile steel brushes for efficiently removing rust and corrosion from items made of brass, copper or other soft ferrous metals. Shape makes it well suited for cleaning flat surfaces. Can also be used to create an artistic effect on coarse-grained wood. 1/8 In. (inch) shanks. Do not run in excess of 15,000 RPM (revolutions per minute).
View Details
$8.79
2PK 1/2" CRBN STL BRUSH
Versatile steel brushes for efficiently removing rust and corrosion from items made of brass, copper or other soft ferrous metals. Shape makes it well suited for cleaning flat surfaces. Can also be used to create an artistic effect on coarse-grained wood. 1/8 In. (inch) shanks. Do not run in excess of 15,000 RPM (revolutions per minute).
View Details
$8.99
2PK 1/8" CRBN STL BRUSH
Versatile steel brushes for efficiently removing rust and corrosion from items made of brass, copper or other soft ferrous metals. Shape makes it well suited for cleaning flat surfaces. Can also be used to create an artistic effect on coarse-grained wood. 1/8 In. (inch) shanks. Do not run in excess of 15,000 RPM (revolutions per minute).
View Details
$9.99
1/2" POLISHING WHEEL (2-PK)
A polishing wheel for your drill that has the polishing compound inside. Wheel is impregnated with a silicon carbide abrasive and lubricant, eliminating the need for polishing compound. Polishing wheels fit most Dremel rotary tools. Ideal for polishing and buffing of most ferrous metals, stones, glass and ceramics.
View Details
$9.19
2PK SS WHEEL WIRE BRUSH
Small versatile stainless steel brushes for efficiently removing rust and corrosion, polishing metal surfaces. Will not cause after rust when used on stainless steel or other corrosive-resistant materials. Use on pewter, aluminum, stainless steel, and other metals. 1/8 In. (inch) shank.
View Details
$10.79
2pk BRS WHEEL WIRE BRUSH
Small versatile brass brushes for efficiently removing rust and corrosion, and polishing metal surfaces. Non-sparking and softer than steel. Will not scratch softer metals. Use on gold, copper, brass, and other precious metals. 1/8 In. (inch) shank.
View Details
$14.99
DREMEL BLADE CROSSCUT
Mini rip/crosscut saw blade used with Dremel mini saw blade attachment. Maximum operating speed of 35,000 RPM. 1-1/4" diameter. 48T.
View Details
$17.99
*69PC ASTD CUTOFF WHEEL*****
Contains 69 cut-off wheels (most popular cutting bits) and a mandrel. Removable organizer tray. Includes reusable storage box, application and material usage information. Tool not included.
View Details
$6.49
1-1/4" CUTOFF WHEEL
For cutting metal with limited use on wood and plastic. Cut-off wheel makes it easy to cut or slot bolts, screws, sheet metal, thin wood, and plastic. The cut-off wheel cuts only along its edge. Use with mandrel 402.
View Details
$5.99
3/16" CHAIN SAW STONE
Precision ground for quick and easy chain sharpening. 1/8" shank. 2 per card.
View Details
$6.69
5/32" STONE GRINDING
Precision ground for quick and easy chain sharpening. 1/8" shank. 2 per card.
View Details
$6.19
1/8" MULTIPURPOSE BIT
Cuts wood, plastic, fiberglass, drywall, laminate, aluminum, and vinyl siding. 1/8" steel shank. Carded.
View Details
$5.99
DEMEL WHEEL GRINDING
Aluminum oxide. For deburring, removing rust, and general purpose grinding. For use with mandrel 4 oz. 7/8" diameter, 1/8" thick. 2-pack.
View Details
$19.99
S 2-1/2 BIM NAIL +WD OMT
S 2-1/2 BIM NAIL +WD OMT
View Details
$6.39
DREMEL COLLET 3/32"
For Moto-Tools model No. 260 Series 55-3, model No. 270 Series 66-2, and model No. 280 Series 66-2.
View Details
