264 found, showing page 3 of 7
$64.99
2x48 GALV RDI-CT PIPE*****
Galvanized pipe 18" thru 60". Threaded both ends and shipped with thread protectors. Import.
View Details
$52.99
*STAND WATER HEATER
Constructed of 18-gauge galvanized sheet metal. The stand holds up to 50 gallon water heaters 18" above the floor as required by the National Fuel Gas Code and Uniform Plumbing Code. Stand is easy-to-install, and all hardware and instructions are included.
View Details
$64.99
24"X25'X1/4" FOAM FILTER
High dirt-holding capacity. Pads are washable for repeated use. Easy installation. UL classified. Used in both furnaces and air conditioners. Captures dust/lint, dust mite debris, pollen, mold spores. Washable.
View Details
$99.99
1-1/4"X21' BLACK PIPE
Schedule 40. 21 Ft. lengths. Threaded both ends. Coupling provided on 1 end. Import.
View Details
$52.99
WHT ELONG SLW CLOSE SEAT
This elongated toilet seat is made from resilient plastic with molded-in color that resists wear, chips, and stains. The Whisper Close hinges slowly and quietly close with a tap, eliminating slamming and pinched fingers. The Easy Clean & Change hinges allow for removal of the seat for easy cleaning and replacement. The STA-TITE Seat Fastening System Never Loosens and installs with ease. It also has color-matched bumpers and hinges. It fits all manufacturers' elongated bowls and is made with environmentally friendly materials and processes.
View Details
$59.99
AUSTRIA LAVATORY SINK 4"
Easy cleaning vitreous china, with spacious ledge and basin. Drilled for 4" faucet centers. Includes wall mount kit for lavatory bowl. Meets or exceeds ANSI and CSA standards. Dimensions as follows: Austria: 19-1/2" W. x 16-1/4" D. x 32-1/16" H. Wales: 24-1/2" W. x 18-3/4" D. x 32-1/16" H. 10 year china warranty.
View Details
$52.99
KOHLER MIXER CAP KIT
Kohler mixer cap kit for model K-304 Rite-temp valve.
View Details
$82.99
*BOWL LYON ELONG WH****
*BOWL LYON ELONG WH****
View Details
$97.99
1/6HP SUBM UTILITY PUMP
Portable electric water removal pump. High flow rate, oil-free pump removes water down to 3/8" of surface. Corrosion resistant, sealed thermoplastic construction. Fully submersible. 1/6 HP (horsepower); max. flow rate is 3000 GPH (gallons per hour); 1850 GPH at 10' of discharge lift. 1-1/4" discharge with 3/4" garden hose adapter. For removing water from flooded basements, boats, low-lying outdoor collection spots.
View Details
$99.99
NON-ELECTRIC BIDET SEAT
NON-ELECTRIC BIDET SEAT
View Details
$59.99
3/8-1" CINCH CLAMP TOOL
SharkBite cinch clamp tool for clamping 3/8" to 1" cinch clamp rings for PEX tubing. The SharkBite barb connection system is the best option for connecting PEX tubing in water distribution systems when lower material cost is desired. Robustly constructed with DZR brass and is corrosion resistant. NSF (National Sanitation Foundation) approval.
View Details
$59.99
ELEVATED ELNGTD TLT SEAT
ELEVATED ELNGTD TLT SEAT
View Details
$62.99
MANSFIELD WHITE TOILET TANK
Alto. White toilet tank and cover. 1.6 GPF (gallons per flush)/6.0 LPF (liters per flush) flow rate. Scored 800 gm (gram) on the MaP (Maximum Performance) test. Complete with factory-installed tank trim, trip lever, tank-to-bowl gasket, floor bolts, washers, bolts, and nuts. 14-1/4" high. For complete unit, refer to any of the Alto toilet bowls listed in Related Items (all sold separately).
View Details
$82.99
*WALL MOUNT SINK
Sturdy, 1-piece, structural thermoplastic construction. Extra strong, chip and sag-resistant. Rust, stain, and leak-resistant. Molded in drain for standard 1-1/2" traps. 12 gallon capacity. Extra deep bowl with tapered bottom. Mounts easily to the wall with screws (not included). Just install it under a faucet where you want to hold water. 16-3/4" L. (front to back) x 22" W. (left to right) x 17-11/16" D. (top to bottom). Faucet not included.
View Details
$57.99
SATIN NICKEL SPACESAVER
Metal spacesaver bathroom cabinet with 3 shelves. Size: 24" W. x 68.25" H. x 13.25" D. Fits over standard toilets.
View Details
*#10 3/16" BALL CHAIN NP
Ball chain can be used for many applications such as: Key chains, electric extensions, plumbing needs, window treatments, or tagging. 100-foot spool.
View Details
$57.99
1HDL LAV FCT w/ POPUP
Drip-free washerless cartridge. 1.2 GPM (gallons per minute) maximum at 60 psi (pounds per square inch). Fits standard 4" installation. Low lead compliant waterways. Lifetime limited warranty. Polished chrome finish.
View Details
$94.99
*503 8" UTILITY FAN 160cfm
*503 8" UTILITY FAN 160cfm
View Details
$59.99
676 BATH FAN VENTILATOR 110CFM**
676 BATH FAN VENTILATOR 110CFM**
View Details
$55.99
2HDL BAR FAUCET
Drip-free washerless cartridge. Fits standard 4" installation. 10" spout. 1.5 GPM (gallons per minute) flow rate maximum at 60 psi (pounds per square inch). Polished chrome finish. Lifetime limited warranty. For replacement cartridge see Related Items.
View Details
$62.99
1H CH LAV FAUC W/POP UP
Drip-free washerless cartridge. Fits standard 4" installation. 1.2 GPM (gallons per minute) maximum at 60 psi (pounds per square inch). Low lead compliant waterways. Lifetime limited warranty. Polished chrome finish. ADA compliant.
View Details
$57.99
CHR LAV FAUCET W/POP UP
Drip-free washerless cartridge. 1.2 GPM (gallons per minute) maximum at 60 psi (pounds per square inch). Fits standard 4" installation. Lifetime limited warranty. ADA compliant. For replacement cartridge see Related Items.
View Details
$70.99
*ADLER CH LAV W/PU FCT
Adler single metal handle lavatory faucet with 50/50 pop-up. 1.2 GPM (gallons per minute) flow rate. Solid brass construction, brass waterways, washerless cartridge. 4" centerset, 1/2" I.P.S. connectors. For replacement cartridge see Model No 1255 (SKU 464438). ADA, CSA, and NSF certified. Chrome finish.
View Details
$97.99
*DRAIN BATH CABLE********
Cable drive bath drain. 1-1/2" Schedule 40 PVC. Add your own pipe and cut to desired length. Can adjust to all tubs 17" to 22" deep. Ideal for use on fiberglass, cast-iron, acrylic, marble, or steel tubs and whirlpools. Polished chrome trim. boxed.
View Details
$58.99
ELEVATED ROUND TLT SEAT
ELEVATED ROUND TLT SEAT
View Details
$57.99
1-1/2" FIP BALL VALVE
Forged brass full port ball valve F.I.P. 600 P.S.I. nonshock WOG (1/4" thru 3"). 150 P.S.I. WSP steam. Meets ANSI/NSF 61-1999A (1/2" thru 2"). CSA-3-88 (5 PSIG) certified (1/4" thru 2"). CSA tamper proof. CSA certified CSA B16.33 (125 PSIG) (1/2" thru 1"). UL LP gas 400 P.S.I. Meets federal specification WW-V-35B Type II, Style 3. Suitable for use with flammable liquid (1/2" thru 2"). Pipe ends comply with ANSI B1.20.1. Temperature range -40 deg. F. to 350 deg. F. Import. 1/2" and 3/4" models are also Design Certified by the American Gas Association for use with natural manufactured gas up to 125 PSIG in temperatures between -20 deg. F. to 150 deg. F. These valves meet the following specifications: UL-water (258) 1/2"-2". FM-Fire protection 1/2"-2". AGA-Gas (B16.33-1981). 125 P.S.I. 1/2", 3/4". Manufactured to include no more than 0.25\% weighted average lead content on wetted surfaces.
View Details
$78.72
CLASSIC 2H KITCHEN FAUCET
Classic Series. Chrome finish. 2 acrylic knob handles. 9" long spout. 3-hole 8" center installation. 1.8 GPM (gallons per minute) flow rate. 360 deg. swivel spout, no spray. 1/2" I.P.S. connections. 1-1/2" deck thickness. Complies with California lead-free law AB1953. Lifetime faucet, parts and finish warranty to the original purchaser.
View Details
$89.99
*CLASSIC SGL HDL KITCHEN FAUCET
Classic Series. Chrome finish, lever handles. 3-hole 8" center installation. 1.8 GPM (gallons per minute) flow rate. 360 deg. swivel spout, no spray. Features Diamond Seal Technology for over 5 million trouble-free uses. 3/8" O.D. Pex supply tubes 36" long connections. For replacement cartridge see Model No RP50587 (SKU 401221). ADA (Americans with Disabilities Act) compliant. Complies with California lead-free law AB1953. Lifetime faucet, parts and finish warranty to the original purchaser.
View Details
$89.99
2H CH KIT FAUCET W/SPRY
Windemere Series. 2 S lever handles, 4-hole 8" center installation, high arc spout, 8" L. and 11-5/8" H. with 360 deg. swivel. Matching vegetable sprayer. Replacement cartridge model No. RP41701, 1.8 GPM (gallons per minute) flow rate, 1" maximum deck thickness, 1/2" I.P.S. connections, ADA (Americans with Disabilities Act) compliant. Complies with California lead-free law AB1953. Lifetime faucet, parts and finish warranty to the original purchaser.
View Details
$99.99
CLSSIC CHROME LAV FAUCET
Classic Series. Chrome finish, 2 blade handles, 3-hole 4" centerset installation, pop-up. WaterSense labeled product. Flow rate of 1.5 GPM versus industry standard ASME.A112.18.1/CSA.B125.1 of 1.5 GPM (gallons per minute) flow rate. 1/2" I.P.S. 13/8" deck thickness. ADA compliant. Complies with California lead-free law AB1953. Lifetime faucet, parts and finish warranty to the original purchaser.
View Details
$72.99
2HDL CHR LAUNDRY FAUCET
2-handle metallic laundry faucet with metal handles, 8" spout. 1.5 GPM (gallons per minute) maximum at 60 psi (pounds per square inch). Compression faucet for use in low water pressure and hard water areas. Solid brass construction, brass waterways, compression cartridge. 4" centers, 1/2" I.P.S. connectors. NSF certified. Lifetime limited warranty. Chrome finish.
View Details
$59.99
1hdl CH KIT FAUCET W/SPRY
Single lever handle with black spray. 4-hole installation, 8" spout, 8" centers. 360 deg. swivel spout. 1/2" I.P.S. 1-1/2" deck thickness. Water efficient 1.8 GPM (gallons per minute) flow rate at 60 psi (pounds per square inch). ADA (Americans with Disabilities Act) compliant. Water efficient product meeting CALGreen standards. Lifetime limited faucet and finish warranty to original consumer purchaser.
View Details
$64.99
2hdl CH KIT FAUCET W/SPRY
Chrome finish, 2 clear knob handles, with black spray, 4-hole installation. 8-1/16" spout, 8" centers. 360 deg. swivel spout. 1/2" I.P.S. 1-1/8" deck thickness. 1.8 GPM (gallons per minute) flow rate. Lifetime limited faucet and finish warranty to original consumer purchaser. Core series.
View Details
$72.99
1H CHROME KITCHEN FAUCET
Chrome finish, single lever handle, 9" spout. 8" center, 3-hole installation. Swivel spout, no spray, water efficient 1.8 GPM (gallons per minute) flow rate at 60 psi (pounds per square inch). 360 deg. swivel spout. 1/2" I.P.S. 1-1/2" deck thickness. ADA (Americans with Disabilities Act) compliant. Lifetime limited faucet and finish warranty to original consumer purchaser. Choice series.
View Details
$88.59
2H CHR WM KITCHEN FAUCET
Chrome finish, 2 lever handles, 9-3/8" high, 8" long spout, 1.8 GPM (gallons per minute) flow rate. 7" to 9" wall mount installation, no spray. ADA compliant. Lifetime limited faucet and finish warranty to original consumer purchaser.
View Details