880 found, showing page 3 of 22
$32.99
POLARIZED SAFETY GLASSES
Espresso features: Brown polarized lenses, sleek Havana brown frame, maximum UV protection, tight-wrapping design with soft rubber nosepads. Safety glasses meet the Impact Protector requirements of ANSI (American National Standards Institute)/ISEA (International Safety Equipment Association) Z87.1-2010 and OSHA (Occupational Safety and Health administration) eye protection standards.
View Details
$29.99
N95 10PK RESPIRATOR W/ VALVE
Exhalation valve reduces heat and humidity build-up. Heavy-duty fully adjustable elastic straps for optimum fit and comfort. Electrostatic filter media traps dust and harmful particles while maintaining low breathing resistance. Latex-free and hypoallergenic for users with sensitive skin. NIOSH (National Institute for Occupational Safety and Health) approved, N95 class.
View Details
$49.99
12" 60T SAW BLADE
Super thin laser cut kerf (small diameter blades only) provides faster, cleaner, more exacting cuts. Perma-Shield coating shields blade against heat, gumming, and corrosion. Durable micrograin titanium carbide tipped teeth are impact-resistant to hold their edge longer. Laser cut stabilizer vents trap noise and vibration and stabilize blade. Laser cut heat expansion slots reduce heat and blade warp. Tri-metal shock-resistant brazing for stronger carbide teeth.
View Details
$25.49
*12OZ BALL-PEEN HAMMER
Hickory handle. Forged head. Gray finish on head with polished face and peen.
View Details
$29.99
*11PC 30DEG KNUCKLE PIVOT
Shockwave Impact Duty 30 degree Knuckle Pivoting Bit Holder allows users to drive fasteners and drill holes in tight, difficult work areas. The innovative, compact design locks at a 0 degree or 30 degree angle and is designed for use with Shockwave Impact Duty 1/4" hex accessories. Rated to handle up to 2000 in/lb (inches per pound) of torque in impact drivers. Engineered with Shockwave Impact Duty technology which is built for extreme durability and up to 10 times hardness, these bits feature an innovatively designed geometric shock absorption zone to extend life. 10 Shockwave Impact Duty insert bits are included. 1 each: Phillips Bit 1" P1, P2, P3; Slotted Bit 1" SL1/4", SL1/8", SL3/16", SL9/32"; Square Bit 1" SQ, SQ2; Insert Bit 1" T25
View Details
$31.99
14" SURFACE SCRAPER
Flexible blade helps remove old floors and clean up excess debris. Offers long-lasting durability. Replacement blade available.
View Details
$39.69
8" CENTER CUT PLIER
Channellock center cut plier maximizes cutting power with less force. It's precision design uses Xtreme Leverage Technology (XLT) and improved high carbon alloy steel for superior performance on the job. XLT means considerably less force is required to cut than traditional high leverage. High carbon steel offers superior performance on the job and is specially coated for ultimate rust prevention. Laser heat-treated cutting edges last longer. Channellock Blue grips for comfort.
View Details
$26.99
24OZ BALL-PEEN HAMMER
Hickory handle. Forged head. Gray finish on head with polished face and peen.
View Details
$33.99
32oz BALL-PEEN HAMMER
Hickory handle. Forged head. Gray finish on head with polished face and peen.
View Details
$25.49
*16oz. MALLET HICKORY
Head has a clear lacquer finish. Fine grade hickory. Round head, plain face. 2-1/2" x 5-1/2".
View Details
$42.99
BUTANE SOLDERING KIT
4 in 1 soldering iron kit includes: SolderPro 60 butane powered heat tool, cap with manual striker, heat deflector shield (1), blow torch tip (1), heat gun tip (1), pointed soldering tip (1), and hot knife tip (1), packed in a sturdy and handy storage case. Equivalent to 30W to 70W electric tool. Soldering tip from 410 deg. F. to 750 deg. F. Blow torch to 2400 deg. F.
View Details
$28.99
897 EGGBEATER MIXER
Welded all-steel construction. Fully plated. 7/16" steel hex shaft.
View Details
$28.99
LEAD FREE SOLDER KIT
Contains 1/4 Lb. silver bearing lead-free solder. Safe, lead-free. Water flushable. Stays soft in cold weather. Won't separate in extreme heat. .117 In. gauge, 96\% tin, 4\% silver composition with 430 F (degrees Fahrenheit) melting range. 1.7 Oz. flux removes surface oxidation and provides superior wetting properties which allow better solder flow. Effective on all metals except aluminum and stainless steel.
View Details
$29.99
LEAD FREE SOLDER KIT
Contains 1/4 lb. silver bearing lead-free, solid core, .117 In. gauge solder with 96\% tin, 4\% silver composition and 430 F (degrees Fahrenheit) melting range. Works as easily as 50TW/50 lead solder with exactly the same soldering technique. 1.7 oz. H-2095 water soluble tinning flux is formulated to clean, flux, and pre-tin all metals except aluminum. Includes applicator brush and sand cloth.
View Details
$32.99
13PC TITANIUM BIT SET
135 deg. split point for no slip starting on hard materials. Parabolic flute design for improved heat dissipation and increased life. Industrial M7 grade steel for high-performance drilling in metal, wood, and plastic. Extra hard titanium coating for maximum service life. Jobbers length. Sizes in set: 1/16",5/64", 3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", and 1/4". Packaged in a molded plastic case.
View Details
$39.99
12" RGHT ANGLE FLEXSHAFT
90 degree head and flexible shaft reaches tight spaces. Rapid Load head enables fast, easy bit changes and each fastener is supported by a magnet for accurate alignment. Side handle offers additional leverage and support.
View Details
$28.49
*PLIER LG NOSE 6"
The Channellock E-Series features (XLT) Xtreme Leverage Technology for considerably less force required to cut than traditional high leverage designs. The streamlined design is longer for precision handling, while the pipe grip design accommodates many shapes. High-carbon C1080 steel for superior performance and an electronic coating for ultimate rust prevention. Laser heat-treated cutting edges last longer. Crosshatch pattern on jaws grips work tightly. Blue dipped plastic grips.
View Details
$25.99
*PLIERS DIAGONAL 6"
The Channellock E-Series features (XLT) Xtreme Leverage Technology for considerably less force required to cut than traditional high leverage designs. The streamlined design is longer for precision handling, while the pipe grip design accommodates many shapes. High-carbon C1080 steel for superior performance and an electronic coating for ultimate rust prevention. Laser heat-treated cutting edges last longer. Blue dipped plastic grips.
View Details
$31.99
*8" PLIER LONG NOSE
The Channellock E-Series features (XLT) Xtreme Leverage Technology for considerably less force required to cut than traditional high leverage designs. The streamlined design is longer for precision handling, while the pipe grip design accommodates many shapes. High-carbon C1080 steel for superior performance and an electronic coating for ultimate rust prevention. Laser heat-treated cutting edges last longer. Crosshatch pattern on jaws grips work tightly. Blue dipped plastic grips.
View Details
$29.99
7" PLIER, DIAGONAL
The Channellock E-Series features (XLT) Xtreme Leverage Technology for considerably less force required to cut than traditional high leverage designs. The streamlined design is longer for precision handling, while the pipe grip design accommodates many shapes. High-carbon C1080 steel for superior performance and an electronic coating for ultimate rust prevention. Laser heat-treated cutting edges last longer. Blue dipped plastic grips.
View Details
$37.99
1-1/4" TC GRIT HOLE SAW
Designed to work with any variable speed hand drill to cut clean holes smoothly without snagging. Cuts abrasive construction materials. Tungsten carbide grit edge is self-sharpening for long cutting life. Extreme resistance to heat and abrasion. Arbor design allows for easy removal of cut material plug. For the builder, tile setter, homeowner, do-it-yourselfer, construction worker and other professionals. Drills ceramic tile, concrete block, cement board, brick, fiberglass, plexiglass, PVC (polyvinyl chloride), wood, cultured marble, drywall, plastic and nail embedded wood. Not recommended for use on metal. 3/8 In. shank. Includes arbor and pilot bit.
View Details
$39.99
1-3/4" TC GRIT HOLE SAW
Designed to work with any variable speed hand drill to cut clean holes smoothly without snagging. Cuts abrasive construction materials. Tungsten carbide grit edge is self-sharpening for long cutting life. Extreme resistance to heat and abrasion. Arbor design allows for easy removal of cut material plug. For the builder, tile setter, homeowner, do-it-yourselfer, construction worker and other professionals. Drills ceramic tile, concrete block, cement board, brick, fiberglass, plexiglass, PVC (polyvinyl chloride), wood, cultured marble, drywall, plastic and nail embedded wood. Not recommended for use on metal. 3/8 In. shank. Includes arbor and pilot bit.
View Details
$42.99
2-1/8" TC GRIT HOLE SAW
Designed to work with any variable speed hand drill to cut clean holes smoothly without snagging. Cuts abrasive construction materials. Tungsten carbide grit edge is self-sharpening for long cutting life. Extreme resistance to heat and abrasion. Arbor design allows for easy removal of cut material plug. For the builder, tile setter, homeowner, do-it-yourselfer, construction worker and other professionals. Drills ceramic tile, concrete block, cement board, brick, fiberglass, plexiglass, PVC (polyvinyl chloride), wood, cultured marble, drywall, plastic and nail embedded wood. Not recommended for use on metal. 3/8 In. shank. Includes arbor and pilot bit.
View Details
$43.99
2-1/2" TC GRIT HOLE SAW*********
Designed to work with any variable speed hand drill to cut clean holes smoothly without snagging. Cuts abrasive construction materials. Tungsten carbide grit edge is self-sharpening for long cutting life. Extreme resistance to heat and abrasion. Arbor design allows for easy removal of cut material plug. For the builder, tile setter, homeowner, do-it-yourselfer, construction worker and other professionals. Drills ceramic tile, concrete block, cement board, brick, fiberglass, plexiglass, PVC (polyvinyl chloride), wood, cultured marble, drywall, plastic and nail embedded wood. Not recommended for use on metal. 3/8 In. shank. Includes arbor and pilot bit.
View Details
$36.99
ARROW HD HAMMER TACKER
Heavy-duty, with perfect balance. All-steel construction, chrome finish. 1-hand operation. Shatterproof plastic handle. Loads 170 model No. T50 staples.
View Details
$25.99
PROF H/D STAPLE GUN
Heavy steel construction, chrome finish, precision engineered. Drives staples flush to surface. Wedge-pointed staples spread to lock themselves in wood. Loads 85 model No. T-50 staples of .050" wire.
View Details
$32.99
*HAMMR FRAMING 20OZ*************
Full polished, quality forged head, octagon neck, extra large striking head for heavy use by carpenters and other tradesmen. Best grade clear white hickory handle.
View Details
$28.49
5PK 12" 14T TORCH BLADE
Heavy-duty metal demolition blade is designed to reduce bending and breaking. Double Duty Upgrade features a tooth form optimized for the longest life and maximum durability. Tough Neck ribs strengthen the blade tang and minimize breakage. Grid Iron honeycomb pattern throughout body of blade increases blade rigidity to resist blade buckling. Ideal for making tough, straight cuts.
View Details
$32.99
2-9/16" CT HOLE SAW DIABLO
Carbide-tipped hole saws cut both wood and metal (wood, nail-embedded wood, plastic, aluminum, metal, cast iron, stainless steel and metal). Delivers longer cutting life than bi-metal for faster cutting performance and increased productivity. 2-3/8 In. (60 mm) cutting depth for 40\% deeper holes in one pass and increased productivity. Variable Tooth Design for faster cuts. SnapLock Plus mandrel system for quick and easy changes with no down time (includes mandrel, pilot bit,5/8 In. threaded adapter (fits diameters 1-1/4 In. to 6 In.) and 1/2 In. threaded adapter (fits diameters 9/16 In. to 3-1/16 In.). In.One size fits all In. mandrel fits all Diablo holes saws in the carbide and bi-metal range, from 5/8 In.to 6 In. diameter. Tool-free plug ejection for fast material removal.
View Details
$25.99
6'' 6/9T CARBIDE GP RECIP 3pc
Carbide tooth design for up to 50 times cutting life in wood and metal applications. Patented variable tooth technology provides faster cuts with less vibration. Unique plunge tip design enables faster and easier plunging. Perma-SHIELD non-stick coated for less gumming and friction. 1 In. demolition body for straighter cuts with less vibration.
View Details
$36.99
3PK 9'' CARBIDE GP RECIP
Carbide tooth design for up to 50 times cutting life in wood and metal applications. Patented variable tooth technology provides faster cuts with less vibration. Unique plunge tip design enables faster and easier plunging. Perma-SHIELD non-stick coated for less gumming and friction. 1 In. demolition body for straighter cuts with less vibration.
View Details
$47.99
12'' 6/9T CARBIDE GP RECIP 3pc
Carbide tooth design for up to 50 times cutting life in wood and metal applications. Patented variable tooth technology provides faster cuts with less vibration. Unique plunge tip design enables faster and easier plunging. Perma-SHIELD non-stick coated for less gumming and friction. 1 In. demolition body for straighter cuts with less vibration.
View Details
$34.99
HAMMER BRICK 24oz
Hickory wood handle. Forged polished striking head, sides and blade. Sharp cornered, square, flat face for splitting brick. Plastic seal in eye to seal out moisture and keep handle tight.
View Details
$25.99
5PK 12'' RECIP BLADE
Diablo Steel Demon reciprocating saw blades are specifically designed for maximum performance in metal demolition applications. The blade's ultra-hardened cutting edge delivers up to 4 times longer life than those of standard blades. Dual Tooth design features a double tooth configuration with small gullets for faster material removal and extra durability. Perma-SHIELD nonstick coating protects from corrosion while reducing friction and heat.
View Details
$27.99
RATCHET SCREWDRIVER
20 bits including 7/16", 3/8", 11/32", 5/16", 9/32", and 1/4" nutdriver bits. No. 1, No. 2, and No. 3 Phillips head bits; 3/16", 5/32", and 1/4" slotted; No. 1, No. 2, and No. 3 square bits; T6, T8, T10, T15, and T20 Torx bits.
View Details
$8.895
*MALE THREADED ADAPTER**********
Model No. 4819. Male threaded adapter. Fits 1-3/8" and 1-3/4" push-button handles. For use with bull floats, fresnos, and brooms.
View Details
$26.99
4" BM HOLE SAW DIABLO
High performance hole saws deliver faster cutting performance and increased productivity. Hole saw design provides ultimate cutting depth to bore deeper holes in one pass, Variable Tooth Design for faster cuts with less vibration, and tool-free plug ejection for fast material removal. Snap-Lock offers quick and easy change system with no down time. One Snap-Lock mandrel fits all Diablo hole saws, from 5/8 In. to 6 In. diameter. For use with wood, metal. Mandrel and pilot bitsold separately.
View Details
$29.99
4-1/4" BM HOLE SAW DIABLO
High performance hole saws deliver faster cutting performance and increased productivity. Hole saw design provides ultimate cutting depth to bore deeper holes in one pass, Variable Tooth Design for faster cuts with less vibration, and tool-free plug ejection for fast material removal. Snap-Lock offers quick and easy change system with no down time. One Snap-Lock mandrel fits all Diablo hole saws, from 5/8 In. to 6 In. diameter. For use with wood, metal. Mandrel and pilot bitsold separately.
View Details
$32.99
4-1/2" HOLE SAW
High performance hole saws deliver faster cutting performance and increased productivity. Hole saw design provides ultimate cutting depth to bore deeper holes in one pass, Variable Tooth Design for faster cuts with less vibration, and tool-free plug ejection for fast material removal. Snap-Lock offers quick and easy change system with no down time. One Snap-Lock mandrel fits all Diablo hole saws, from 5/8 In. to 6 In. diameter. For use with wood, metal. Mandrel and pilot bitsold separately.
View Details
$38.99
6" BM HOLE SAW DIABLO
High performance hole saws deliver faster cutting performance and increased productivity. Hole saw design provides ultimate cutting depth to bore deeper holes in one pass, Variable Tooth Design for faster cuts with less vibration, and tool-free plug ejection for fast material removal. Snap-Lock offers quick and easy change system with no down time. One Snap-Lock mandrel fits all Diablo hole saws, from 5/8 In. to 6 In. diameter. For use with wood, metal. Mandrel and pilot bitsold separately.
View Details