223 found, showing page 3 of 6
$13.79
4X4 POST CAP Z-MAX
These connectors are always installed in pairs and connect 4x or 6x wood members at right angles. Eliminates driving nails into end grain. Nails can be added in the triangle holes to increase uplift load capacity. 18-gauge galvanized steel. Some sizes available with ZMAX coating.
View Details
$2.99
WHT DOWNSPOUT BRACKET
Used to support RainGo 2-1/2" square vinyl downspout at every offset elbow, coupler, or discharge spout.
View Details
$4.99
25/BAG RUSTPROOF SCREWS
Used for mounting brackets and fittings on RainGo and Repla K systems. 25 screws per bag.
View Details
$4.29
2X RIGID TIE CONCTR ZMAX
Wraps around the wood members from 2 directions - eliminating the need for angle bracing. Ideal for rectangular frame construction and wood projects with right angles. Connects (2) 2x members at a 90 deg. angle. Galvanized steel. Some sizes are available in ZMAX coating.
View Details
$3.49
1X2-8' FURRING STRIP
Nonstructural strips of wood attached to walls or ceilings as a base for paneling, tile, drywall, or similar materials. They provide a solid nailing surface for any home-finishing work, as well as a consistent nailing surface for roofing installations. Furring strips are bundled for easy handling.
View Details
$3.69
STRAP TIE 2-1/16x12-11/16GA20
Provides support in construction and home repair projects. This product is used to increase tension loads. Staggered nail pattern reduces wood splitting. Made with galvanized steel for extra corrosion resistance.
View Details
$1.49
2x4 FENCE BRACKET Z-MAX
Simpson Strong-Tie fence brackets make the connection between fence rails and posts simple and strong. Eliminates the need for toe-nailing or screwing. Clean, versatile connections make planning and building fences, deck/porch railing, and louvers easier and faster. Holes are sized for 8d x 1-1/2", 8d commons, or No. 6 wood screws into the supporting members. ZMAX coated steel.
View Details
$6.59
2X2-8' FURRING STRIP
Nonstructural strips of wood attached to walls or ceilings as a base for paneling, tile, drywall, or similar materials. They provide a solid nailing surface for any home-finishing work, as well as a consistent nailing surface for roofing installations. Furring strips are bundled for easy handling.
View Details
$3.29
5/32" FERRULES & STOPS
2 ferrules and 2 stops per card. Just set with a hammer. Aluminum.
View Details
$12.29
2X4 PLATEAU CEILING PNL
When budget is a consideration, Plateau acoustical ceiling panels provide an attractive way to finish a ceiling. The mineral fiber panels have a square edge design for quick installation. Medium fissured perforated pattern adds depth and dimension to space. High light reflectance. Class A fire rated. Size: 2 Ft x 4 Ft x 9/16 In. Square edge. Medium texture.8-pieces or 64 Sq. Ft. per case.
View Details
$4.19
HEAVY TIE PLATE Z-MAX
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. 16-gauge galvanized ZMAX steel. 3" W. x 7" L.; use 20-10d x 1-1/2" fasteners.
View Details
$1.99
LSTA 9" STRAP TIE
Designed for use on the edge of 2x members, with a nailing pattern that reduces the potential for splitting. They can be used where plates or soles are cut, at wall intersections, and as ridge ties. Galvanized steel.
View Details
$3.79
MEDIUM L-ANGLE Z-MAX
The ML angle combines strength and versatility through the use of Simpson Strong-Tie Strong-Drive screws (SDS). Fastener holes are staggered to minimize wood splitting and opposing hole patterns allows for back-to-back installation without fastener interference. 12-gauge ZMAX steel.
View Details
$5.19
2X6" MED L ANGLE ZMAX
The ML angle combines strength and versatility through the use of Simpson Strong-Tie Strong-Drive screws (SDS). Fastener holes are staggered to minimize wood splitting and opposing hole patterns allows for back-to-back installation without fastener interference. 12-gauge ZMAX steel.
View Details
$12.79
27" STRAP TIE
Straps are designed to transfer tension loads in a wide variety of applications. Splitting may be a problem with installations on lumber smaller than 3-1/2"; either fill every nail hole with 10d x 1-1/2" nails or fill every other hole with16d common nails. Reduce the allowable load based upon the size and quantity of fasteners used. Galvanized steel.
View Details
$1.59
WT6 WEDGE FORM TIE
Designed for low foundation wall applications. 5/8" wide formed V design for rigidity allows accurate form spacing and support. Use (2) 3-1/2" long wedges for each tie. Used with 2x solid sawn lumber. Not recommended for wall pours greaterthan 4' high. 18-gauge galvanized steel.
View Details
$1.89
PLATE MENDING 3-1/8x5"
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2" nails. 20-gauge galvanized steel.
View Details
$14.79
*4X4 POST BASE
The PB base embeds in wet concrete after pour and is made to install flush with the concrete surface. This connector was designed to help resist upload forces. Holes are provided for installation with 16d commons. A 2" minimum side cover is required to obtain the full load. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or carports). 12-gauge galvanized steel. Some sizes available with ZMAX coating.
View Details
$16.49
10x25 4MIL BLK POLY FILM
4 mil. Super strength linear plastic. Has more puncture resistance and elasticity. Energy saving. Uses: Construction, landscaping, drop cloth, cover, soil erosion, garden mulch, camping, etc.
View Details
$16.49
10X25 4MIL CLR POLY FILM
4 mil. Super strength linear plastic. Has more puncture resistance and elasticity. Energy saving. Uses: Construction, landscaping, drop cloth, cover, soil erosion, garden mulch, camping, etc.
View Details
$1.39
1-1/2X6 NAIL STOP
Nail stoppers help prevent nails from piercing water pipes and electrical lines. Installed over utilities that pass through framing members. 16-gauge galvanized steel.
View Details
$19.99
.9GL W/D PLASTIC RF CMNT
Premium grade mastic compound is a blend of selected asphalts, selected fillers, and petroleum solvents. Smooth, easy working consistency adheres to wet or dry surfaces. High resistance to weathering and provides excellent durability against the stresses and wear to which this product is normally exposed. Can be used for emergency repairs during inclement weather conditions, repairing leaks in composition, mineral surface cap sheet, asphalt coated, shingles, concrete, flashings, gutters, around chimneys, downspouts and eaves. Repairs most types of roof surfaces - metal, shingles and concrete. Coverage is 12-1/2 Sq. Ft. per Gal. 12 month limited warranty.
View Details
$11.29
RED ONDURAPREM RIDG CAP
RED ONDURAPREM RIDG CAP
View Details
$5.99
1X1-1/2 GV EDGE FLASHING
A style. 10 Ft. long. 200 Ft. per bundle except 3 In. x 3 In., 4 In. x 4 In., and 3 In. x 5 In. (5/12 pitch) which has 100 Ft. per bundle.
View Details
$11.29
GRN ONDURAPREM RIDG CAP
GRN ONDURAPREM RIDG CAP
View Details
$9.99
30OZ WET PATCH RF CEMENT
A premium compound for sealing roof leaks on wet surfaces. Made of a heavy-bodies asphalt, it patches holes and cracks even in a driving rain or under water, and is so versatile it may be used whether the weather is wet, dry, hot, or cold. This roof cement is especially easy-to-spread in cold temperatures. Usage: To repair holes, cracks, and splits on composition, mineral surface cap sheet, asphalt coated, SBS modified, metal, and masonry roofs. To seal leaks and openings around flashings, chimneys, vents, skylights, joints in metal edging, gutters, etc. Color: Black.
View Details
$24.99
GL COLD RF/LAP ADHESIVE
Premium brush or squeegee grade, waterproof adhesive made from asphalt, solvents, and organic fibers. Replacement for hot asphalt in built-up roofing (BUR) applications. Designed for bonding layers of asphalt-coated base sheets. Eliminates burn and fire hazards of hot asphalt. Greater cohesive strength for a reliable roof and cold weather flexibility than hot asphalt. Recommended for use in built-up roofing (BUR) applications with: 25 lb. or heavier asphalt-coated fiberglass base sheets, conventional mineral surfaced cap sheet, polyester fabric, and bonding gravel or granule surfacing. Do not use with No. 15 or 30 saturated felts. Suitable for application with a notched squeegee or 4-knot roofing brush. Coverage varies with smoothness and porosity of surface coated. UL classified for Class A and B fire rated roof coatings. Conforms to ASTM D-3019 Type III.
View Details
$21.49
4"x150' ELASTO FABRIC TAPE
Spunbonded, 100\% polyester, nonwoven, heat-set polyester mat. For use with model No. HE289046 Elasto CAULK and other Henry asphaltic mastics and coatings. High degree of fabric impregnability, tensile strength, expansion behavior, puncture resistance, tongue tear strength, and tear strength. Repair fabric for both new and old construction in roofing and waterproofing applications. 8.7 mil. thickness.
View Details
$11.99
FBR YL GLS 6x25
Yellow resin-coated glass fabric is a woven fabric made of yarns of inert, flexible filaments of pure glass. It has a 20 x 10 mesh thread count. It has a tensile strength of 75 lb./in., stability and durability, and is acid and heat-resistant and will not rot or decay. The special yellow resin coating on the fabric minimizes distortion and is compatible with asphalt and coal tar cements and coatings, emulsions, solvent-based and hot-melt types. Since the yellow color is conspicuous if not completely covered, it also aids quality workmanship. Usage: The fabric is designed to reinforce roof cement and coatings when used in roof repair work, for flashings, and for sealing seams in metal and composition roofs. It is also used in below-grade waterproofing applications, tank lining systems, and for waterproofing planter boxes. Application: Apply roof cement approximately 1/8" thick, or coating approximately 1/16" thick, or as specified. Embed product smoothly, without wrinkles or buckles. Top coat the fabric with roof cement or coating of the same thickness as the embedding coat, or as specified, making sure the glass is entirely covered.
View Details
$3.19
STRAP TIE 2-1/16"x9-7/16"GA20
Provides support in construction and home repair projects. This product is used to increase tension loads. Staggered nail pattern reduces wood splitting. Made with galvanized steel for extra corrosion resistance.
View Details
$8.19
STRAP TIE 1-1/16"x22-7/16"GA16
Provides support in construction and home repair projects. This product is used to increase tension loads. Staggered nail pattern reduces wood splitting. Made with galvanized steel for extra corrosion resistance.
View Details
$2.19
ANGLE FRAMING 3"
Used to reinforce angle connections. Staggered nail pattern reduces the possibility for splitting. Stronger than a toe-nailed connection. 16-gauge galvanized steel. Some sizes available with ZMAX coating.
View Details
$3.39
5" REINFORCING L-ANGLE
Used to reinforce angle connections. Staggered nail pattern reduces the possibility for splitting. Stronger than a toe-nailed connection. 16-gauge galvanized steel. Some sizes available with ZMAX coating.
View Details
$21.99
*STRAP POST 12"
Versatile utility strap. General reinforcement angles for T intersections. These connectors are strongest when used in pairs. Galvanized.
View Details
$23.99
38x79 RED ONDURA ROOFING
38x79 RED ONDURA ROOFING
View Details
$24.29
1/4"x4'x8'TEMPERED MASONITE HB
DPI's Signature S2S Green Core hardboard panels offer a solid foundation for finished products worldwide. Known for it's unparalleled smooth surface, Signature S2S has become the standard in wood based substrates. Ultra smooth surface that resists buckling and warping. Green Core provides strength, no delamination or loose fiber. Environmentally responsible low VOC, no added formaldehyde product. Easy-to-cut and route, coat, or laminate. Flawless foundation for any product.
View Details
$21.49
*3/4" ALMD FRP RIVET
High-impact thermoplastic. Inconspicuous, blends with panel. Rivet head shape seats tightly against panel, won't snag. Barbed rivet shank. To be used with the Structoglas panels.
View Details
$4.29
*HANGER JOIST 4X6
This hanger features patented double shear nailing, which distributes the load through 2 points on each joist nail for greater strength. It also allows for the use of fewer nails, faster installation, and the use of common nails for all connections. 18-gauge galvanized steel. Some double shear joist hangers are available in ZMAX coating.
View Details
