Category: Price: $ 100.00 - $ 199.99
35 found, showing page 3 of 3
$184.99
INTEGRITY INT-LTX FLAT PASTEL
Premium quality paint that gives a soft flat finish to interior walls in white and a wide range of decorator colors. Spatter-resistant. Provides a washable, spot-resistant 1 coat finish. Covers up to 400 Sq. Ft. per gallon on smooth surfaces. Dries to touch in 30 to 60 minutes. Product uses: Properly prepared interior walls and ceilings including previouslypainted and primed plaster, wood, brick drywall, cement, and metal.
View Details
$179.99
EXT S/G EX DEEP BS PAINT
This paint is formulated with 100\% acrylic resins for durability and color fast performance, use on most exterior building surfaces including wood, masonry, stucco, and metal. Tint bases can be mixed to over 1000 custom colors. Is resistant to fading, peeling, and blistering, and covers with 1 coat when applied over properly prepared surfaces. Covers approximately 400 Sq. Ft. per gallon. Recommend priming new wood with Do it Best latex or alkyd exterior wood primer. Dries to the touch in 2 Hrs., and to recoat in 4 to 6 Hrs. Apply with brush, paint pad, or sprayer. Easy to clean up with soap and water. Available in tint bases and packaged colors. Low temperature application down to 35 Deg. F. Satisfaction guaranteed.
View Details
$139.09
KILZ 2 INT/EX LTX PRIMER
A fast drying, water-base multi-surface primer-sealer-stain blocker with excellent adhesion, sealing properties and very mild odor. KILZ 2 latex primer also blocks most light stains and provides a mildew resistant coating. Hides previous colors well. Good adhesion and sealer. Stains: water, rust, grease, ink, pencil and felt marker. Use on: Interior, drywall, woodwork, plaster, paneling, wallpaper, masonry, brick, architectural plastics, and non ferrous metals.
View Details
$164.99
YELLOW LATEX TRAFFIC PAINT
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$139.99
PROHIDE INT-EXT MULTI PRIMER
PROHIDE INT-EXT MULTI PRIMER
View Details