116 found, showing page 3 of 8
$59.99
RED RUSTY METAL PRIMER
Transform heavily rusted metal into a paintable surface with Rust-Oleum Stops Rust Rusty Metal Primer. This primer bonds tightly to rust and forms a surface top coats can adhere to with no need for additional top coats or touch-ups. Indoor/outdoor. Durable, corrosion-resistant. For best results: Top with Professional Enamel for maximum performance.
View Details
$57.29
SMOKE GRAY ENAMEL
Rust-Oleum Stops Rust finishes are durable, tough, excellent hiding air dry finishes for interior or exterior protection of most metal, wood, or masonry surfaces. Rust-Oleum coatings resist weathering, salt air, moisture, mild chemicals, and industrial fumes. Prime metal surfaces with Rusty Metal Primer or White Clean Metal Primer. Rust-Oleum finishes cover up to 400 Sq. Ft. per gallon, dries to touch in 2 to 6 hours and to recoat after 24 hours. They may be applied with brush, roller, or spray. Thin sparingly for spray. If thinning is required, use paint thinner or mineral spirits. Clean up with paint thinner or mineral spirits. Gloss sheen except where specified. Available in flat, semi-gloss or satin.
View Details
$56.99
HUNTER GREEN ENAMEL
Rust-Oleum Stops Rust finishes are durable, tough, excellent hiding air dry finishes for interior or exterior protection of most metal, wood, or masonry surfaces. Rust-Oleum coatings resist weathering, salt air, moisture, mild chemicals, and industrial fumes. Prime metal surfaces with Rusty Metal Primer or White Clean Metal Primer. Rust-Oleum finishes cover up to 400 Sq. Ft. per gallon, dries to touch in 2 to 6 hours and to recoat after 24 hours. They may be applied with brush, roller, or spray. Thin sparingly for spray. If thinning is required, use paint thinner or mineral spirits. Clean up with paint thinner or mineral spirits. Gloss sheen except where specified. Available in flat, semi-gloss or satin.
View Details
$56.99
WHITE ENAMEL
Rust-Oleum Stops Rust finishes are durable, tough, excellent hiding air dry finishes for interior or exterior protection of most metal, wood, or masonry surfaces. Rust-Oleum coatings resist weathering, salt air, moisture, mild chemicals, and industrial fumes. Prime metal surfaces with Rusty Metal Primer or White Clean Metal Primer. Rust-Oleum finishes cover up to 400 Sq. Ft. per gallon, dries to touch in 2 to 6 hours and to recoat after 24 hours. They may be applied with brush, roller, or spray. Thin sparingly for spray. If thinning is required, use paint thinner or mineral spirits. Clean up with paint thinner or mineral spirits. Gloss sheen except where specified. Available in flat, semi-gloss or satin.
View Details
$77.99
BLK MARINE BOTTOM PAINT
A protective copper-based coating for use below the waterline on the boat bottom. Hard antifouling coating slowly releases copper, preventing the build-up of barnacles, algae, and other marine growth. Use for mild to moderate fouling conditions in both fresh and saltwater. Formulated for use on both trailered boats and boats that remain in the water all season or all year long. Contains 45\% cuprous oxide (copper) which has the best category features (hard antifouling). Do Not use on aluminum surfaces as the copper in the coating will react unfavorably. Newly painted boats shoud be launched within 60 days of painting for best antifouling performance. Priming is not necessary on bare fiberglass or previously painted surfaces (lightly sanded and in good condition). To prime bare wood, apply thinned (10\% mineral spirits to 90\% antifouling paint) paint followed by a full-strength antifouling paint for subsequent coats. Bare metal needs to be primed with a 2-part industrial epoxy primer (contact Tech helpline 800/787-8258). Quart size.
View Details
$77.99
BLUE MARINE BOTTOM PAINT
A protective copper-based coating for use below the waterline on the boat bottom. Hard antifouling coating slowly releases copper, preventing the build-up of barnacles, algae, and other marine growth. Use for mild to moderate fouling conditions in both fresh and saltwater. Formulated for use on both trailered boats and boats that remain in the water all season or all year long. Contains 45\% cuprous oxide (copper) which has the best category features (hard antifouling). Do Not use on aluminum surfaces as the copper in the coating will react unfavorably. Newly painted boats shoud be launched within 60 days of painting for best antifouling performance. Priming is not necessary on bare fiberglass or previously painted surfaces (lightly sanded and in good condition). To prime bare wood, apply thinned (10\% mineral spirits to 90\% antifouling paint) paint followed by a full-strength antifouling paint for subsequent coats. Bare metal needs to be primed with a 2-part industrial epoxy primer (contact Tech helpline 800/787-8258). Quart size.
View Details
$54.99
*WOOD/FBGLS MARINE PRIMER
Specialty marine primer for use above the waterline. Use antifouling paint for boat bottom preparation. Quart size. Use on wood and fiberglass.
View Details
$65.99
HI-GLOSS CLEAR ACRYLIC SEALER
A clear, urethane-fortified acrylic sealer developed to provide a high-gloss premium finish to painted, stained, or bare concrete. It is durable, long-wearing, scratch-resistant, stain-resistant, and it extends paint life to interior and exterior floors and garage floors. It also protects against moisture damage and enhances the natural color of brick, slate, stone, exposed aggregate, saltillo, clay pavers, and stamped concrete. New concrete must have cured for a minimum of 30 days. Freshly painted surfaces must have cured for a minimum of 72 hours. Apply in light, even coats with a solvent resist roller (1/4" nap on smooth surfaces or 3/8" nap for rough surfaces) or pump sprayer set at a fine spray. Covers approximately 150 to 500 sq. ft. per gallon, depending on surface porosity. May add anti-skid additive to reduce slips. Dries in 2 hours and will accept vehicle traffic in 72 hours. Clean with soap and water.
View Details
$78.99
B-I-N INT PRIMER SEALER*********
A flat, white primer for every interior surface, even metal or glass. Closes the pores of most surfaces and prevents bleeding stains, sappy wood from ruining paint job. Covers crayon marks, grease stains, dark wallpaper designs, etc. Made with a base of pure shellac, and dries in 45 minutes. May be applied with brush, roller, or airless sprayer.
View Details
$52.99
SAFETY BLUE PRO ENAMEL
Tough durable air-dry finishes for most metal, wood, and masonry surfaces. Covers up to 500 sq. ft. per gallon. Dries tack-free in 4 to 6 hours. Recoat after 24 hours. Available in Federal safety colors.
View Details
$53.99
SAFETY YELLOW PRO ENAMEL
Tough durable air-dry finishes for most metal, wood, and masonry surfaces. Covers up to 500 sq. ft. per gallon. Dries tack-free in 4 to 6 hours. Recoat after 24 hours. Available in Federal safety colors.
View Details
$52.99
SAFETY ORANGE PRO ENAMEL
Tough durable air-dry finishes for most metal, wood, and masonry surfaces. Covers up to 500 sq. ft. per gallon. Dries tack-free in 4 to 6 hours. Recoat after 24 hours. Available in Federal safety colors.
View Details
$52.99
SAFETY RED PRO ENAMEL
Tough durable air-dry finishes for most metal, wood, and masonry surfaces. Covers up to 500 sq. ft. per gallon. Dries tack-free in 4 to 6 hours. Recoat after 24 hours. Available in Federal safety colors.
View Details
$64.99
JD GREEN IMPLEMNT ENAMEL
Durable, rust preventive enamel with Stops Rust formula offers excellent coverage, chip resistance, and color retention. Dries to the touch in 2 to 4 hours - handled in 5 to 9 hours. Can be recoated in 1 hour. Ideal for tractors, farm implements, lawn mowers, and more.
View Details
$64.99
CAT YEL IMPLEMENT ENAMEL
Durable, rust preventive enamel with Stops Rust formula offers excellent coverage, chip resistance, and color retention. Dries to the touch in 2 to 4 hours - handled in 5 to 9 hours. Can be recoated in 1 hour. Ideal for tractors, farm implements, lawn mowers, and more.
View Details