56 found, showing page 1 of 2
$8.29
3/8x7/8x16 SS BRAID FLEX
Toilet connector, high pressure braided stainless steel flex line, tested to 1800 lbs (pounds). Brass inserts, chrome plated brass nuts, IPS x Ballcock x length. Use to connect most toilets to water source.
View Details
$21.49
1-1/2x1-1/2 20GA J-BEND
Sink trap J-bend less cleanout with captive zinc nut on lower bend. Replacement for P and S-traps. Sink Trap J-bends have captive nut on lower bend and loose nut with slip-joint washer on upper bend.
View Details
$14.99
CHROME TUB STOPPER
Lift and turn style. Includes reversible 3/8" and 5/16" stem. Fits virtually all non-trip lever strainers. Chrome finish. Clamshell pack.
View Details
$8.89
AUTO VENT VALVE
Eliminates expensive secondary vent stacks. Can be used for sinks, basins, tubs, showers, vanities, and washing machines - not to be used for toilets. 1-1/2" Male pipe threads. Packed 1 per Do it card. Each drainage system using a Mechanical vent must have a main vent stack to atmosphere (through the roof) located so as to vent the water closet. Do not install the mechanical vent in sealed wall cavity - install in a readily accessible location. Installation limited to structures not exceeding 2 stories in height and without corrosive water.
View Details
$0.89
BULK 3/8" FLANGE
Chrome finish shallow flange. 25 per bag. Import.
View Details
$0.99
BULK 1/2" FLANGE
Chrome finish shallow flange. 25 per bag. Import.
View Details
$7.49
TUB HAIR CATCHER
Tub hair catcher protects drains from unwanted debris. Keeps drains flowing freely, eliminating clogs from foreign objects. Easy to install, no tools needed. Fits most bathtub drains, unique finger lift allows for easy removal and cleaning. Constructed of flexible PVC (polyvinyl chloride).
View Details
$9.79
CHR FOOT LOK CARTRIDGE
Tub drain Foot Lok replacement cartridge, tip-toe style. Do it carded.
View Details
$2.89
2" ABS DRAIN
ABS snap-in drain fits inside Schedule 40 DWV pipe cut flush to floor. Great for direct vent surfaces and water heaters, or to cover any open ended pipe. Solvent welds inside pipe, flush to floor. 2-3/8" plastic strainer. 1-piece. Bulk.
View Details
$4.39
3" ABS DRAIN
ABS snap-in drain fits inside Schedule 40 DWV pipe cut flush to floor. Great for direct vent surfaces and water heaters, or to cover any open ended pipe. Solvent welds inside pipe, flush to floor. 2-3/8" plastic strainer. 1-piece. Bulk.
View Details
$4.59
*4" ABS DRAIN
ABS snap-in drain fits inside Schedule 40 DWV pipe cut flush to floor. Great for direct vent surfaces and water heaters, or to cover any open ended pipe. Solvent welds inside pipe, flush to floor. 2-3/8" plastic strainer. 1-piece. Bulk.
View Details
$17.99
LAVATORY POP-UP
1-1/4" drain, cast brass tee, lift rod and knob, removable stopper, chrome-plated. For use with any centerset that is drilled for pop-up lift rod, with overflow.
View Details
$14.99
*4" BRASS CLEANOUT PLUG
Hollow pattern with raised square head. Made of a solid brass material.
View Details
$3.99
*1-1/2" STRAINER CUP
Fits the small kitchen sink outlet. Chrome-plated. For 1-1/2" drain opening. Carded.
View Details
$13.79
*TWIST/LOCK BASKET*****
For Turn'n Seal or Spin-Lock style strainers. 3-1/2" stainless steel basket with threaded, chrome-plated brass post. Replaces basket in original Spin'n Grin strainers.
View Details
$16.49
1-1/2X7 22GA WALL TUBE
Wall tube brass 22-gauge. Do it hang tagged.
View Details
$4.29
OVERFLOW WASHER
Beveled rubber 2-3/16" I.D. Use for tight seal on tubs with sloping walls. Carded.
View Details
$5.79
*2" BRASS CLEANOUT PLUG
Hollow pattern with raised square head. Made of a solid brass material.
View Details
$24.49
F/P LNG-SHNK SS STRAINER
Do it stainless 3-1/2" steel strainer - long shank style. Extra deep cup stainless steel body with locking shell. Long shank with deep cut threads. Fixed post stainless steel basket with safety rolled edge. Die-cast locknut and long shank slip nut. Includes neoprene stopper, rubber locknut washer, locknut friction washer, and flanged tailpiece washer. Refer to model No. K22022 for replacement basket (sold separately). Do it carded.
View Details
$13.99
BN TRIPLEVER STRAINER
2" O.D. strainer dome cover with screw for triplever bath drain. 2" screw. Do it carded.
View Details
$12.99
*BN TRIPLEVER FACE PLATE
Face plate for trip lever bath drain with screws. Brushed nickel. Do it carded.
View Details
$17.99
*BN FOOT LOK CARTRIDGE
Tub drain Foot Lok replacement cartridge, tip-toe style. Do it carded.
View Details
$10.29
PLASTC TRIPLEVER LINKAGE
Do it linkage assembly for trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. White plastic bucket. Do it carded.
View Details
$13.29
CHR FOOT LOK CARTRIDGE*****
Tub drain Foot Lok replacement cartridge, tip-toe style. Do it carded.
View Details
$24.99
SQUARE TILE SHOWER DRAIN********
PVC shower drain with snap-tite square top stainless steel strainer for tile shower base. Low profile for tight spaces. Designed for use on built-up shower bases of tile or marble, where a shower pan liner is used. The clamping ring locking bolts screw into brass inserts to prevent stripping. 2" I.P.S. strainer barrel allows adjustment to the finished floor level. Solvent welds over 2" or inside 3" Schedule 40 DWV pipe. Has a 4-1/4" screw on strainer. Stainless steel.
View Details
$5.49
DISPOSER STOPPER
Plastic. Fits Kenmore, In-Sink-Erator , Emerson, and Crosley. Fits inside throat of disposer. 3-6/8". Carded.
View Details
$17.99
SINK STRAINER
Stainless steel for 3-1/2" O.D. drain opening. Easy-to-install 3-point mount design. Includes clamp, nut, and washers. Standard 1-1/2" slip-joint for tailpiece. For replacement basket see Model No 405000 (SKU 405000).
View Details
$13.29
FIXED POST SS STRAINER
Stainless steel strainer and body. Fixed post stainless steel basket with safety rolled edge. Die-cast locknut and long shank slip nut. Includes neoprene stopper, rubber locknut washer, locknut friction washer, and flanged tailpiece washer. 3-1/2" strainer with 3" basket. Boxed.
View Details
$5.39
REPAIR STRAINER/******
White plastic replacement basket with post. For Private Label stainless steel/ABS kitchen basket strainer.
View Details
$15.99
ROUND ABS SHOWER DRAIN
Designed for use with preformed shower bases; fiberglass, acrylic, nylon, or metal. Solvent welds over 2" Schedule 40 DWV pipe. Includes 4-1/4" snap-in strainer. Fiber and rubber gasket provides a tight seal to the base.
View Details
$24.99
2" BRASS SHOWER DRAIN
No-caulk cast brass shower drain with snap in stainless steel strainer. 2 In.
View Details
$11.99
*PB TUB FACE PLATE
Metal bathtub face plate with trip lever for use with bath overflow and drain. Includes screws. Easy-to-use. Carded.
View Details
$12.99
2" SINK STRAINER
For use with 2" O.D. drain opening with grid outlet. Chrome. 1 per card. Uses 1-1/4" tailpiece (not included).
View Details
$13.99
1-1/2&1-1/4 FLEX J-BEND
Will work with any existing system. Replaces 1-1/4" and 1-1/2" J-bends. For kitchen and bathroom installations. Extends from 6" to 9-1/2". Do it bagged.
View Details
$14.29
1-1/2&1-1/4 FLEX J-BEND
Will work with any existing system. Replaces 1-1/4" and 1-1/2" J-bends and adapter. Will fit kitchen sink drains with cast elbow. Do it bagged.
View Details
$7.99
1-1/2X15 SJ/DC WASTE ARM
Waste arm 1-1/2" x 15" slip-joint or direct connect plastic. Do it bagged.
View Details
$6.29
1-1/2" END OUTLET TEE
1-1/2". With sanitary baffle tee for double bowl sinks. Universal slip-joint or direct connection. Do it bagged.
View Details
$6.59
1-1/2" CENTER OUTLET TEE
1-1/2" center outlet tee and tailpiece with sanitary baffle. Slip-joint. Do it hang tagged.
View Details
$7.49
1-1/2 WHT PLASTIC J-BEND
Sink trap J-bend 1-1/2" x 1-1/2" or 1-1/2" x 1-1/4" with captive nut. Do it bagged.
View Details
$10.49
1-1/2 WHT PLASTIC S-TRAP
Replacement S-trap for bathroom lavatory drains. White. With nuts and washers for assembly. Do it bagged.
View Details
