371 found, showing page 7 of 25
$39.99
LATEX TRAFFIC PAINT WHITE
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$164.99
YELLOW LATEX TRAFFIC PAINT
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$4.69
*1-1/2" AS GEN-PURP BRUSH
General Purpose paint brush features a solid wood handle, brass ferrule, wood plugs and polyester filament with chiseled trim. Quality finish with all types of paints and finishes.
View Details
$1.59
PAINT CAN POUR SPOUT
1 size fits pint, quart, gallon, and 4 liter paint cans. Snaps onto inner rim of paint can to keep paint out of the gutter and ensure a good seal after use. Also serves as a brush wiper and brush set.
View Details
$154.99
WHT LATEX MARKING PAINT
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$31.99
LATEX CURB PAINT RED
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$31.99
LTX TRAFFIC PAINT HC BLUE
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$14.99
BRUSH CLEANER QT
Cleans hardened oil and latex paints, enamels, varnish, lacquer and shellac from natural and nylon brushes. Water rinsable for easy cleanup.
View Details
$5.69
4" BRISTLE CHIP BRUSH
Made with white natural bristles for use with oil-based paints, stains, and finishes. Also excellent for use as parts cleaning brushes or to apply adhesives. Sanded wood handle and tin-plated ferrule.
View Details
$2.29
3" BRISTLE CHIP BRUSH
Made with white natural bristles for use with oil-based paints, stains, and finishes. Also excellent for use as parts cleaning brushes or to apply adhesives. Sanded wood handle and tin-plated ferrule.
View Details
$2.19
2.5" BRISTLE CHIP BRUSH
Made with white natural bristles for use with oil-based paints, stains, and finishes. Also excellent for use as parts cleaning brushes or to apply adhesives. Sanded wood handle and tin-plated ferrule.
View Details
$1.99
2" BRISTLE CHIP BRUSH
Made with white natural bristles for use with oil-based paints, stains, and finishes. Also excellent for use as parts cleaning brushes or to apply adhesives. Sanded wood handle and tin-plated ferrule.
View Details
$1.79
1.5" BRISTLE CHIP BRUSH
Made with white natural bristles for use with oil-based paints, stains, and finishes. Also excellent for use as parts cleaning brushes or to apply adhesives. Sanded wood handle and tin-plated ferrule.
View Details
$1.69
1" BRISTLE CHIP BRUSH
Made with white natural bristles for use with oil-based paints, stains, and finishes. Also excellent for use as parts cleaning brushes or to apply adhesives. Sanded wood handle and tin-plated ferrule.
View Details
$1.29
1/2" BRISTLE CHIP BRUSH
Made with white natural bristles for use with oil-based paints, stains, and finishes. Also excellent for use as parts cleaning brushes or to apply adhesives. Sanded wood handle and tin-plated ferrule.
View Details
