353 found, showing page 4 of 24
$39.99
WHT LATEX TRAFFIC PAINT
WHT LATEX TRAFFIC PAINT
View Details
$18.99
HUNTER GREEN LATEX PAINT
An all-purpose latex brushable paint for use on wood, metal, wicker, and crafts. Durable gloss finish provides excellent resistance to chipping, cracking, and peeling and has outstanding fade resistance and sheen retention. Suitable for use on interior and exterior surfaces. Safe for use on children's toys and furniture. Also available in flat and semi-gloss white and black. Dries to touch in 20 minutes and to handle in 1 hour. Covers up to 100 sq. ft. per quart.
View Details
$154.99
WHT LATEX MARKING PAINT
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$34.99
LATEX CURB PAINT RED
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$39.99
COLOR CHANGING LATEX -FLAT WHITE
Never miss a spot again with this unique ceiling paint goes on purple but dries white. The ultra premium quality interior latex paint will provide 1-coat coverage, nonglare flat finish, and easy soap and water clean up. Covers approximately 350 Sq. Ft. per gallon on smooth sealed surfaces. Dries to touch in 45 minutes.
View Details
$4.49
LATEX PAINT HARDENER
Paint hardener quickly turns leftover paint solid for curbside disposal. Mix with paint, let harden, and dispose. Hardens up to 2/3 gallon of leftover paint. Works with latex and acrylic paints and stains.
View Details
$39.99
EXT LATEX WOOD PRIMER
Our best. Promotes the adhesion of either oil or latex topcoats. Fast drying formulation throughly seals the surface and cleans up easily with soap and water. Provides excellent flexibility on bare or weathered wood. Covers up to 400 sq. ft. per gallon on smooth surfaces. Dries to touch in 1 hour under normal temperature and humidity. Product uses: Exteriorbare of weathered wood, masonry, or concrete block. May be tinted with up to 4 oz. of colorant per gallon.
View Details
$53.99
GLS PSTL/WHT LATEX PAINT
New and improved interior/exterior, direct to metal (DTM), water-based high gloss acrylic enamel designed for industrial maintenance and construction purposes. Use on machinery, farm implements, fixtures, conveyors, safety equipment, metal, wood, and doors. Provides excellent rust and corrosion resistance. Acceptable for use in federally inspected meat and poultry plants. Use for safety colors for marking in industrial, construction, traffic areas. Surfaces must be clean, dry, and in sound condition. Remove all loose rust, paint, and any contamination to ensure adequate adhesion. For better adhesion, undercoat iron, steel, and aluminum with Do it Best waterborne primer. Allow a minimum of 6 months to weather galvanized steel before priming and topcoating. Masonry and block surfaces should be clean and dust-free and cured for atleast 28 days; fill holes with block filler before topcoating. Apply with a synthetic brush, roller, or airless sprayer. Clean up with soap and water. Covers approximately 300 to 350 sq. ft. per gallon. Dries to touch 20 to 45 minutes or to recoat in 4 to 6 hours.
View Details
$51.99
INT/EXT WHT LATEX PRIMER
An interior/exterior, direct to metal (DTM), water-based corrosion-resistant primer and topcoat designed for industrialmaintenance and construction purposes. Use on machinery, farm implements, fixtures, conveyors, safety equipment, aluminum, metal, steel, and doors. Provides maximum color and gloss retention. May also be used alone as a flat finish topcoat. Prepare surfaces by removing any loose paint, dust, rust, or dirt to ensure adhesion. Solvent clean iron and steel surfaces and prime bare steel within 8 hours before flash rusting occurs. Allow a minimum of 6 months to weather before priming. Topcoat with Do it Best waterborne industrial enamel or alkyd industrial enamel. Apply with synthetic brush, roller, or airless sprayer. Clean up with soap and water. Covers approximately 150 to 290 Sq. Ft. per gallon. Dries to touch 20 to 45 minutes or to recoat in 4 to 6 hours.
View Details
$53.99
GLS BLACK LATEX PAINT
New and improved interior/exterior, direct to metal (DTM), water-based high gloss acrylic enamel designed for industrial maintenance and construction purposes. Use on machinery, farm implements, fixtures, conveyors, safety equipment, metal, wood, and doors. Provides excellent rust and corrosion resistance. Acceptable for use in federally inspected meat and poultry plants. Use for safety colors for marking in industrial, construction, traffic areas. Surfaces must be clean, dry, and in sound condition. Remove all loose rust, paint, and any contamination to ensure adequate adhesion. For better adhesion, undercoat iron, steel, and aluminum with Do it Best waterborne primer. Allow a minimum of 6 months to weather galvanized steel before priming and topcoating. Masonry and block surfaces should be clean and dust-free and cured for atleast 28 days; fill holes with block filler before topcoating. Apply with a synthetic brush, roller, or airless sprayer. Clean up with soap and water. Covers approximately 300 to 350 sq. ft. per gallon. Dries to touch 20 to 45 minutes or to recoat in 4 to 6 hours.
View Details
$18.99
DEEP BLUE LATEX PAINT
An all-purpose latex brushable paint for use on wood, metal, wicker, and crafts. Durable gloss finish provides excellent resistance to chipping, cracking, and peeling and has outstanding fade resistance and sheen retention. Suitable for use on interior and exterior surfaces. Safe for use on children's toys and furniture. Also available in flat and semi-gloss white and black. Dries to touch in 20 minutes and to handle in 1 hour. Covers up to 100 sq. ft. per quart.
View Details
$18.99
KONA BROWN LATEX PAINT
An all-purpose latex brushable paint for use on wood, metal, wicker, and crafts. Durable gloss finish provides excellent resistance to chipping, cracking, and peeling and has outstanding fade resistance and sheen retention. Suitable for use on interior and exterior surfaces. Safe for use on children's toys and furniture. Also available in flat and semi-gloss white and black. Dries to touch in 20 minutes and to handle in 1 hour. Covers up to 100 sq. ft. per quart.
View Details
$18.99
COLONIAL RED LATEX PAINT
An all-purpose latex brushable paint for use on wood, metal, wicker, and crafts. Durable gloss finish provides excellent resistance to chipping, cracking, and peeling and has outstanding fade resistance and sheen retention. Suitable for use on interior and exterior surfaces. Safe for use on children's toys and furniture. Also available in flat and semi-gloss white and black. Dries to touch in 20 minutes and to handle in 1 hour. Covers up to 100 sq. ft. per quart.
View Details
$9.99
DEEP BLUE LATEX PAINT
An all-purpose latex brushable paint for use on wood, metal, wicker, and crafts. Durable gloss finish provides excellent resistance to chipping, cracking, and peeling and has outstanding fade resistance and sheen retention. Suitable for use on interior and exterior surfaces. Safe for use on children's toys and furniture. Also available in flat and semi-gloss white and black. Dries to touch in 20 minutes and to handle in 1 hour. Covers up to 100 sq. ft. per quart.
View Details
$9.99
KONA BROWN LATEX PAINT
An all-purpose latex brushable paint for use on wood, metal, wicker, and crafts. Durable gloss finish provides excellent resistance to chipping, cracking, and peeling and has outstanding fade resistance and sheen retention. Suitable for use on interior and exterior surfaces. Safe for use on children's toys and furniture. Also available in flat and semi-gloss white and black. Dries to touch in 20 minutes and to handle in 1 hour. Covers up to 100 sq. ft. per quart.
View Details
