Price: $ 100.00 - $ 199.99
35 found, showing page 1 of 3
$169.99
INT S/G ULTRA WHT PAINT
Self-priming paint provides long-term durability that is washable and scrubbable, and can be applied directly to previously painted surfaces or uncoated drywall. 2 coats are recommended when painting over uncoated drywall, or when using vibrant colors. Paint over sound, nonpeeling, previously painted nonglossy surfaces. For extreme household stains (ink, pencil, grease, etc.) and water damage stains, use appropriate stain-blocking primer. Use on properly prepared drywall, plaster, masonry, and bare wood. Suggested areas are kids room, kitchen, bathroom, hallway, and trim. 1 gallon will cover 350 Sq. Ft. to 400 Sq. Ft., less on rough or textured surfaces. Dries to a satin sheen. Allow at least 4 hr of drying time before recoating. Apply at temperatures between 50 Deg. F and 90 Deg. F. Clean wet paint from hands and tools along with any spills or spatters immediately with soap and water. Do not thin. Satisfaction guaranteed.
View Details
$142.99
AXN-YELLOW COLORANT
NovoColor II colorants are no VOC universal colorants designed to tint Valspar paint and Cabot Stain. They are specifically engineered to meet stringent VOC restrictions and for use with all oil-alkyd and latex/waterborne tint bases.
View Details
$137.99
M-MAGENTA COLORANT
NovoColor II colorants are no VOC universal colorants designed to tint Valspar paint and Cabot Stain. They are specifically engineered to meet stringent VOC restrictions and for use with all oil-alkyd and latex/waterborne tint bases.
View Details
$139.99
S-RED COLORANT
NovoColor II colorants are no VOC universal colorants designed to tint Valspar paint and Cabot Stain. They are specifically engineered to meet stringent VOC restrictions and for use with all oil-alkyd and latex/waterborne tint bases.
View Details
$120.29
T-MEDIUM YELLOW COLORANT
NovoColor II colorants are no VOC universal colorants designed to tint Valspar paint and Cabot Stain. They are specifically engineered to meet stringent VOC restrictions and for use with all oil-alkyd and latex/waterborne tint bases.
View Details
$159.99
INT FLAT PASTEL BS PAINT
Formulated to provide beautiful results and reliable performance. It's a top-of-the-line professional quality paint that delivers a uniform finish with outstanding hide, smooth application, and exceptional touch-up. It is ideal for residential/commercial repaints and new construction. MPI approved for gloss levels 1-5. Dries to touch in 30 minutes, re coat in 4 hours. Coverage is 400 Sq. Ft. per gallon. Satisfaction guaranteed.
View Details
$159.99
1GL GACO LIQUID RF TAPE
GacoRoof LiquidRoof Tape is a thick, high-build, rubber-like liquid consisting of 100\% silicone and microfibers. Provides a seamless membrane for: depressions, drains, fasteners, flashings, joints, small cracks, vents, and more. Completely encapsulates fasteners and protrusions. 100\% waterproof. Exhibits resistance to wear under light foot traffic. Coverage: 50 LFT/Gal. at 3 In. wide. 3 to 12 Hr. drying time. 50 Yr. limited warranty.
View Details
$119.99
1GL WHT GACOROOF COATING
GacoRoof 100\% Silicone Roof Coating creates a seamless membrane to seal and repair existing roofs and permanently protect against leaks, permanent ponding water, and the damaging effects of severe weather. 1 to 12 Hr. cure time, dry to the touch. Bonds to asphalt, composite, concrete, fiberglass, metal, and most existing coatings on flat or sloped roofs. UV resistant. Ideal for use on flat and sloped roofs including, but not limited to, large and small buildings, homes, garages and patio covers, sheds and barns, mobile homes, RVs and more.
View Details
$119.99
1GL GRY GACOROOF COATING
GacoRoof 100\% Silicone Roof Coating creates a seamless membrane to seal and repair existing roofs and permanently protect against leaks, permanent ponding water, and the damaging effects of severe weather. 1 to 12 Hr. cure time, dry to the touch. Bonds to asphalt, composite, concrete, fiberglass, metal, and most existing coatings on flat or sloped roofs. UV resistant. Ideal for use on flat and sloped roofs including, but not limited to, large and small buildings, homes, garages and patio covers, sheds and barns, mobile homes, RVs and more.
View Details
$119.99
*QUIKRETE EPOXY FLR GRAY********
*QUIKRETE EPOXY FLR GRAY********
View Details
$159.99
KILZ 3 INT/EXT LTX PRIMR
A superior quality fast drying, low odor, zero VOC water-base, primer-sealer-stain blocker. Formulated to minimize problems caused by color changes, minor stains, surface textures and porosity differences, it offers excellent adhesion and provides a mildew resistant coating. High hide formula / blocks previous colors and medium stains. Seals surfaces for uniform finish. Stains: Water, tannin, ink, pencil, felt-marker and grease. Use on: Wood, non ferrous metals, cured plaster, wallpaper, masonry, concrete block/CMU, Vinyl/PVC, fiberglass, and under or over latex or oil based paint.
View Details
$154.99
WHT LATEX MARKING PAINT
Fast dry marking paints that are designed for streets and parking lots. They may be ambient, airless, conventional, or heated to accelerate the dry time. Normal dry time is 10 minutes at 77 deg. F. at 50\% humidity. These meet or exceed the current VOC regulations and to the requirements of Federal Specification TT-P-01952E Types I and II. Use on cured asphalt, concrete, brick, and other street or highway surfaces. Do not paint on wet surfaces. Dries to a flat finish. Covers approximately 300 to 350 sq. ft. per gallon or approximately 320 lineal ft. with 4" stripe. Do not use brush or roller. Apply with Airless Line Sprayer at 1800 to 2700 P.S.I. with .015 to .019" tip or Conventional Line Sprayer (atomization pressure 20 to 80 P.S.I.) Thin with water up to 12.5\% by volume if needed. Clean hands and tools immediately after use with soap and warm water. Flush spray equipment with mineral spirits to prevent rusting of equipment.
View Details
$179.99
EXT S/G NEUTRAL BS PAINT
This paint is formulated with 100\% acrylic resins for durability and color fast performance, use on most exterior building surfaces including wood, masonry, stucco, and metal. Tint bases can be mixed to over 1000 custom colors. Is resistant to fading, peeling, and blistering, and covers with 1 coat when applied over properly prepared surfaces. Covers approximately 400 Sq. Ft. per gallon. Recommend priming new wood with Do it Best latex or alkyd exterior wood primer. Dries to the touch in 2 Hrs., and to recoat in 4 to 6 Hrs. Apply with brush, paint pad, or sprayer. Easy to clean up with soap and water. Available in tint bases and packaged colors. Low temperature application down to 35 Deg. F. Satisfaction guaranteed.
View Details
$129.99
GRAY GARAGE EPOXYSHIELD
Environmentally friendly and easy-to-use. Its water-based, low odor, nontoxic formulation creates great looking, long-lasting floors. The formula is engineered to withstand the harsh elements common to most garage floors, new and old, and at the same time maintain a beautiful finish. The durable finish resists hot tire pick up and abrasions. Protects your floor from gasoline, antifreeze, brake fluid, motor oil, and salt. Kit includes 2-part epoxy floor mixture (1 gallon-part 1 and 1 quart-part 2), decorative, installation booklet, and stir stick. Covers approximately 250 Sq. Ft. on smooth surfaces or 125 to 200 Sq. Ft. on rough porous concrete. Recommended application with long handled roller with short nap cover. Available in Gray (with Blue-multi color skid resistant color chips) and Tan (with Brown-multi color skid resistant color chips), Tint Base (does not include color chips-sold separately, contact Rust-Oleum for tint formulas).
View Details
$129.99
TAN GARAGE FLOOR EPOXY
Environmentally friendly and easy-to-use. Its water-based, low odor, nontoxic formulation creates great looking, long-lasting floors. The formula is engineered to withstand the harsh elements common to most garage floors, new and old, and at the same time maintain a beautiful finish. The durable finish resists hot tire pick up and abrasions. Protects your floor from gasoline, antifreeze, brake fluid, motor oil, and salt. Kit includes 2-part epoxy floor mixture (1 gallon-part 1 and 1 quart-part 2), decorative, installation booklet, and stir stick. Covers approximately 250 Sq. Ft. on smooth surfaces or 125 to 200 Sq. Ft. on rough porous concrete. Recommended application with long handled roller with short nap cover. Available in Gray (with Blue-multi color skid resistant color chips) and Tan (with Brown-multi color skid resistant color chips), Tint Base (does not include color chips-sold separately, contact Rust-Oleum for tint formulas).
View Details
